ODT009298862 Power Line Assembly Sany SAT40C Articulated Dump Truck Spare Parts

ODT009298862 Heavy-Duty Battery & Alternator Power Cable Group for Sany SAT40C

The ODT009298862 Power Line Assembly is a primary high-current electrical cable routing group designed for the 24V power distribution network of the Sany SAT40C articulated dump truck. Heavy duty mining dump trucks require substantial battery power to crank their large-displacement diesel engines. This group contains the thick-gauge positive (+) and negative (-) battery lines connecting the battery box under the catwalk platform to the main starter motor, the battery disconnect switch, the charging alternator, and the auxiliary cab power terminal boxes.

This assembly integrates six dedicated, heavy-duty Power Cables (ODT009298850, ODT005930986, ODT005930996, ODT005931003, ODT009298853, and ODT005931014). Each cable is manufactured from pure, highly flexible multi-strand copper wire terminated with heavy-duty crimped and soldered copper ring lugs to ensure low resistance. To withstand the hostile conditions of mine sites—such as oil splash, high-temperature engine runs, tyre spray, and mechanical vibrations—every cable is wrapped in heat-stabilized, flame-retardant corrugated split loom tubing. We supply the fully integrated ODT009298862 power line set as well as individual battery positive, ground (earth), and starter cables. Both genuine Sany OEM kits and highly reliable aftermarket options are in stock for rapid international shipping.

General Assembly Specifications

ODT009298862 Assembly Component Parts List

Below is the detailed parts catalog breakdown of the power line assembly as referenced in the Sany SAT40C technical manual. All listed heavy-duty copper cables are orderable separately:

Features & Benefits of Our Heavy-Duty Power Cables

• Low-Resistance Copper Cores: Manufactured from multi-strand, high-purity flexible copper wire to ensure maximum conductivity, delivering consistent high-amperage current during cold starter-cranking phases without voltage drops.
• Industrial-Grade Thermal Insulation: Protected by heat-stabilized, flame-retardant corrugated split loom tubing. This shields the copper lines from mechanical abrasion, hydraulic oil swelling, engine bay heat, and tyre-flung stones.
• Rugged Sealed Copper Lugs: Terminated with heavy-duty, tin-plated copper ring lugs that are crimped and soldered to ensure a corrosion-proof, low-resistance connection at battery terminals and starter studs.

Ordering & Technical Maintenance Guidelines

1. Verify Battery System Configuration: Sany SAT40C trucks use specific battery series and isolator switch layouts. Please provide your chassis serial prefix so our technical team can verify the exact length and terminal lug sizes before shipping.
2. Check for Terminal Corrosion: Mining road moisture and chemical fumes can cause oxide buildup on battery terminals, raising resistance and causing starting failures. Inspect cable lugs regularly; clean off any corrosion and ensure terminal nuts are torqued properly.
3. Ensure Secure Cable Routing: When replacing power lines, always run them through the specified structural support brackets and rubber-lined metal p-clips. Never allow heavy-gauge positive (+) lines to rub against sharp steel chassis joints, which can lead to high-current short circuits.

Contact our B2B sales department today with part number ODT009298862, your desired quantities, and delivery port to receive a formal commercial quotation within 1 business day.