ODT007282268 Intake Pipe Assembly Sany SAT40C Articulated Dump Truck Spare Parts

ODT007282268 Intercooler Air Intake Pipe Assembly for Sany SAT40C

The ODT007282268 Intake Pipe Assembly is a primary charge-air ducting system designed for the turbocharged engine of the Sany SAT40C articulated dump truck. Modern high-horsepower dump trucks depend on high turbocharger boost pressures to force oxygen-dense air into the cylinders. Before this compressed air enters the engine manifold, it is routed through this intake piping group to the Charge Air Cooler (Intercooler) to lower its temperature. Due to extreme thermal variations and high internal air pressure (often exceeding 2.0 bar of turbo boost), these pipes and hoses must maintain a perfect hermetic seal to prevent “boost leaks,” which cause severe engine power drop, black exhaust smoke, and increased fuel consumption.

This assembly integrates the pre-bent alloy Intake Pipe (ODT007244916), a multi-ply reinforced Inlet Hose (ODT005921757) designed to absorb engine vibration and thermal expansion, an Air Inlet Tube (14353267), and four heavy-duty spring-loaded T-type Spring Clamps (60250992). We supply the fully integrated ODT007282268 assembly as well as individual hoses, metal pipes, and constant-tension clamps. Both genuine Sany OEM parts and high-integrity aftermarket alternatives are ready for B2B export shipment globally.

General Assembly Specifications

ODT007282268 Assembly Component Parts List

Below is the detailed parts catalog breakdown of the air intake pipe assembly as referenced in the Sany SAT40C technical manual. All listed components can be ordered individually for targeted field service or routine hose replacements:

Features & Benefits of Our Intake Pipe Assembly

• Constant-Tension Boost Sealing: Equipped with premium spring-loaded T-type clamps (60250992). The integrated spring mechanism expands and contracts dynamically with the thermal cycles of the intake hoses, maintaining a continuous circular holding force that prevents hose slippage and boost pressure drops.
• Vibration and Fatigue Resistance: The multi-ply reinforced Inlet Hose (ODT005921757) is engineered to absorb engine block movements and chassis twists, preventing these stresses from reaching and cracking the rigid intercooler core headers.
• Precision Pre-Bent Profile: The main Intake Pipe (ODT007244916) is bent strictly to Sany factory specifications to bypass engine block accessories, ensuring smooth, low-restriction air delivery.

Ordering & Technical Maintenance Guidelines

1. Verify Air Duct Diameters: Air intake pipe routing and hose diameters can vary slightly based on the truck’s engine build series or regional emission packages. Please provide your Sany SAT40C’s chassis serial prefix so our technical team can verify exact dimensional compatibility before shipping.
2. Always Use Spring-Loaded Clamps: Standard worm-gear hose clamps are prone to loosening over time due to thermal expansion. When replacing the intake hose, always use the specified constant-tension T-type spring clamps (item 2) to eliminate the risk of boost leaks.
3. Inspect Hoses for Swelling or Splits: Reinforced silicone inlet hoses (item 1) can soften, swell, or split over extended service cycles due to high intake heat. Inspect these hoses during routine maintenance and replace them immediately if they show signs of damage.

Contact our B2B sales department today with part number ODT007282268, your desired quantities, and delivery port to receive a formal commercial quotation within 1 business day.