330101068 Intake/Exhaust Bracket Assembly XCMG XDE130 Electric driving dump truck spare parts

The 330101068 intake/exhaust bracket assembly is an original equipment manufacturer (OEM) product from XCMG, specifically designed for XCMG excavators (such as XE60 and XE200GH), loaders (such as LW321F and ZL50G), and road rollers (such as XS160 and XD110). It addresses the pain points of ordinary brackets, such as easy deformation, welding cracking, poor vibration resistance, and easy creep at high temperatures. It is a core component for the installation and maintenance of equipment’s intake and exhaust systems. The product is made from high-quality base materials and manufactured through CNC cutting, precision bending, gas shielded welding, sandblasting, and hot-dip galvanizing processes. It is suitable for high-temperature, high-dust, high-frequency vibration, and salt spray corrosion conditions, perfectly compatible with original equipment, and meets XCMG’s supply chain digitalization requirements.

Core technical parameters

– Product Model: 330101068
– Product Name: Intake/Exhaust Bracket Assembly (XCMG Construction Machinery Specific)
– Material specifications: High-quality carbon steel (Q235B, Q345B) / S33010 stainless steel (national standard 12Cr16Ni35), S33010 stainless steel chromium content 14.00%~17.00%, nickel content 33.00%~37.00%, plate thickness 3-10mm, with matching bolts, spring washers, and seals, precise hole positions, meeting relevant standards and XCMG matching requirements.
– Processing technology: CNC cutting, precision bending, gas shielded welding, sandblasting (Sa2.5 grade), hot-dip galvanizing/epoxy zinc-rich spraying, the weld is full and defect-free, without burrs or deformation, and passes weld flaw detection and hardness testing. S33010 material requires special welding materials. After welding, it undergoes stabilization treatment and is stable in operation.
– Suitable for: XCMG excavators, loaders, road rollers, etc. Used to fix the intake pipe, exhaust pipe, and muffler. Suitable for high temperature and high dust, high frequency vibration, salt spray corrosion, and oily conditions. Especially suitable for high temperature areas of the engine, providing stable support without interfering with other parts of the equipment.
– Core parameters: Tensile strength ≥515MPa (S33010 material), ≥370MPa (carbon steel material), load capacity ≥25kN, salt spray test ≥800 hours, zinc coating thickness ≥85μm, installation error ≤0.3mm, verticality deviation ≤0.5mm/m, weld flaw detection pass rate 100%.
– Temperature range: -40℃~600℃, suitable for high-temperature conditions of engine intake and exhaust. S33010 material can withstand higher temperatures, resist creep and aging, oil and corrosion, no brittleness at low temperatures, no deformation at high temperatures, and can withstand vibration and impact for a long time.
– Structural features: One-piece welded structure, reinforced with additional ribs to enhance load-bearing capacity, pre-drilled holes for compatibility with original piping, chamfered edges to prevent impact, anti-corrosion surface treatment for rust and corrosion resistance, elastic shock-absorbing connection components to mitigate vibration and impact, balance torsional stress, and prevent breakage and damage.
– Installation method: Matches XCMG original interface, bolts are tightened and fixed. Before installation, clean the mounting surface and check the hole position. Tighten the bolts in diagonal order. Before installing the S33010 material bracket, the heat treatment effect after welding needs to be checked. No equipment modification is required. It is easy to disassemble and assemble. It can be used with shock-absorbing components to improve the vibration resistance.
– Service life: ≥8000 hours under normal working conditions, 2-year warranty, corrosion rate ≤0.002mm/year. The service life of S33010 material is 30% longer than that of ordinary stainless steel. It is waterproof, oil-proof and dustproof, without deformation, cracking or loosening, and has long-term stable support performance.

We specialize in XCMG components. The 330101068 intake/exhaust bracket assembly effectively secures intake and exhaust system components, mitigates vibration and impact, resists high-temperature corrosion, prevents pipe loosening, wear, or cracking, reduces maintenance costs, is compatible with various XCMG construction machinery, provides comprehensive after-sales service, supports original factory verification, and offers nationwide warranty.

Get a personalized quote now