C107460 XCMG GR2605 motor grader pipe clamp

Introduction

Technical Parameters

• Part Number: C107460 (107460)
• Brand: DCEC Cummins
• Type: Engine Pipe Clip (Pipe Fixing Clamp, Pipe Clamp)
• Material: High-quality Q235 carbon structural steel (main body), lined with nitrile rubber (NBR) buffer layer (some specifications), the rubber layer has oil-resistant and high-low temperature resistant characteristics
• Fit Engines: Cummins ISB6.7, ISDe4.5, ISDe6.7, QSB6.7, B5.9 series
• Structure: Integrated hoop structure with bolt installation holes, lined with buffer rubber layer (some specifications), open design for easy pipeline installation, the inner wall of the hoop fits the pipeline contour, with good wrapping performance
• Key Dimensions: Hoop inner diameter φ28mm, width 22mm, bolt hole spacing 38mm, main body thickness 1.8mm (adapted to the corresponding specifications of engine pipelines)
• Surface Treatment: Surface hot-dip galvanizing/spraying anti-rust treatment, anti-rust grade reaches 48 hours of salt spray test without rust, the rubber layer temperature resistance range is -40℃~120℃
• Installation Method: Fastened to the engine cylinder block and bracket with bolts, embed the pipeline into the hoop, tighten the bolts to achieve fixation, and can be matched with flat washers and spring washers to enhance tightness
• Cross Reference: 3901234, 4932300, C107461 (interchangeable, adapted to pipelines of different diameters)
• Weight: Approximately 0.05kg per piece (steel without rubber layer), 0.06kg per piece (with rubber buffer layer)
• Applicable Parts: Side and front end of the engine cylinder block, and key positions of pipeline layout, used to fix various pipelines such as cooling water pipes, engine oil pipes, and fuel pipes

Application Scenarios

• Vehicles: Medium and heavy-duty trucks and buses equipped with ISDe/ISB/QSB series engines, such as Dongfeng Kinland, Tianjin, Dali Shen, Auman, adapting to the fixing needs of various engine pipelines
• Construction Machinery: 18–26 ton loaders, graders, bulldozers, excavators (QSB6.7, B5.9 engines), forklifts, cranes and other construction equipment, adapting to pipeline fixing scenarios in engineering operations
• Conditions: Harsh environments such as heavy-duty long-distance, mining sites, high-altitude and cold areas, high temperature and high humidity, frequent starts and stops, high-frequency vibration, and can tolerate high dust, strong impact and pipeline thermal expansion and contraction working conditions
• Location: Side and front bracket of the engine cylinder block, pipeline turning points and vibration-prone parts, evenly distributed according to the pipeline layout, corresponding to the fixing needs of cooling water pipes, engine oil pipes, fuel pipes and other pipelines, and precisely fitting the pipeline and mounting surface
• Functions: Fix various engine pipelines, limit pipeline displacement and vibration, avoid pipeline wear, falling off or breaking due to vibration and bumpiness, protect the pipeline surface, buffer the vibration impact generated by engine operation, ensure the sealing and smoothness of the pipeline system, prevent pipeline leakage, and extend the service life of the pipeline.