381100404 XCMG GR2605 motor grader control box wiring harne

381100404 XCMG GR2605 motor grader control box wiring harne

381100404 is the wiring harness for the XCMG GR2605 grader control box assembly. It connects the control box to the vehicle’s electrical system, handling signal transmission and power supply for handles, switches, sensors, etc. It is original factory specification, plug-and-play, requiring no rewiring, and compatible with electronic control logic.

Core Functions and Roles

It collects all electrical signals from the control box, including the start lock, manual/automatic switch, clutch lock-up switch, handles/buttons, etc., and transmits them synchronously to the vehicle controller and actuators. It also provides DC 24V power to ensure the normal operation of the control system.

Using original factory plugs and terminals, it precisely connects to the control box and body wiring harness, requiring no rewiring or wire cutting. Direct plug-and-play connection reduces installation and maintenance time.

The wiring harness sheath is wear-resistant, oil-resistant, and anti-aging. The plug has a sealed structure, suitable for dusty, vibrating, and oily environments on construction sites, reducing faults such as poor contact and open circuits.

Designed according to original factory electrical specifications, fully compatible with the GR2605 electronic control system, supporting interlocking logic and fault alarms to prevent abnormal starting and mode malfunctions caused by wiring problems.

Key Technical Parameters

Model: 381100404
Compatible Model: XCMG GR2605 Grader
Type: Control box assembly wiring harness (including plugs and terminals)
Operating Voltage: DC 24V (Engineering Machinery Standard)
Interface: Original factory connector (compatible with control box and vehicle body wiring harness)
Features: Original factory specifications, plug-and-play, vibration-resistant and dustproof, stable signal transmission

Common Faults and Troubleshooting

Fault Symptoms: Control box buttons/switches unresponsive, abnormal starting, mode switching failure, alarm light illuminated.

Troubleshooting Steps

Check for loose, oxidized, or water-damaged plugs; check for damaged, open/short-circuited wiring harnesses.

Test wiring harness continuity and insulation resistance to confirm normal signal transmission.

If the wiring harness is aged, damaged, or the plug is damaged, simply replace it to restore functionality. Replacement and Maintenance Points

Replacement: Plug in the original factory settings; no rewiring required. After replacement, test all buttons, switches, and mode switching functions.

Maintenance: Regularly check the tightness of the plug and the secureness of the wiring harness to prevent loosening due to vibration. Clean the oxide layer on the plug to extend its service life.

Get a personalized quote now

1. 381100615 Control Panel
2. 803694860 Emergency Stop Switch (Red 2NC)
3. 803633339 Red Indicator Light
4. 803679105 Power Socket
5. 803613348 Starter Lock
6. 381100649 Starter Lock Indicator Plate
7. 803613348 Manual/Automatic Switch
8. 803695192 Single Frame 1 YB1000.0031
9. 803695187 Clutch Lockout Switch
10. 381100404 Control Box Wiring Harness

*For other spare parts procurement needs, please contact us!