329900601 u-shaped pipe clamp XCMG XE2000 excavator spare parts

XCMG XE2000 Excavator U-Type Pipe Clamp (Part No. 329900601): The Expert in Precise Pipe Fixing for Stable Pipeline Construction

In the global heavy-duty construction field of mining engineering, the XCMG XE2000 excavator, with its 192-ton operating weight, powerful 810kW engine, and ultra-large bucket capacity of 10-14m³, has become a “heavy-duty benchmark” in mining. From the high-altitude hard rock mining areas of the Democratic Republic of Congo to the open-pit coal mines of Australia, it consistently conquers extreme working conditions with its stable and efficient performance. Within its intricate pipeline system, the U-type pipe clamp (part no. 329900601), as a “precise locking device” for pipeline fixing, is a core component ensuring the safe and stable operation of critical pipelines such as hydraulic and fuel lines.

I. Bearing the Core Mission of Pipeline Fixation

**Precise Clamping for Stable Support:** The XE2000’s hydraulic pipelines withstand 35MPa high pressure and continuous vibration during high-intensity operations. The U-shaped pipe clamp (329900601), with its unique U-shaped structure design, forms a perfectly fitting, encircling clamp with the pipeline, firmly fixing it in the preset position. Its precise dimensional parameters ensure even distribution of clamping force, preventing displacement and friction due to pipeline loosening, and avoiding deformation or damage due to excessive clamping. In heavy-duty crushing operations after hard rock blasting, the equipment vibration amplitude increases significantly, yet the U-shaped pipe clamp still maintains a stable fixing effect, preventing leakage at pipeline interfaces due to vibration.
**Multi-Scenario Adaptability:** Mining operating environments are complex and diverse, and pipeline layouts must adapt to the spatial constraints of different components. The U-shaped pipe clamp (329900601) features a simple and flexible design, allowing for adjustable fixing angles based on pipe routing and installation space. It adapts to the fixing needs of various components such as booms, slewing platforms, and chassis. Whether the pipe is horizontal, vertical, or inclined, this U-shaped pipe clamp provides reliable fixation, ensuring the piping system remains orderly during full-range equipment operation.

II. Superior Performance Designed for Heavy-Duty Conditions

High-Strength Material and Precision Manufacturing: To meet the heavy-duty requirements of the XE2000, the U-shaped pipe clamp (329900601) is forged from high-strength alloy steel, with a tensile strength exceeding 580MPa, far surpassing ordinary industrial pipe clamp standards. The clamp surface is precision-ground, resulting in smooth, burr-free edges to prevent scratches on the pipe surface during installation. After being treated with Dacromet corrosion protection, the surface withstands over 1000 hours of salt spray testing, ensuring long-term resistance to rust in high-humidity, high-dust mining environments and maintaining clamping performance. Anti-loosening and wear-resistant structural optimization: XCMG engineers optimized the U-shaped pipe clamp structure specifically for the severe vibration environment of mines. An anti-loosening toothed design was added to the connection between the pipe clamp and the bolt, which, when used with a high-strength anti-loosening nut, effectively prevents loosening caused by vibration. An oil-resistant rubber pad is embedded on the inner side of the clamp, enhancing friction with the pipeline and reducing wear from vibration. The rubber pad has undergone a 1000-hour oil resistance test without aging or deformation, ensuring long-term reliability.

III. Quality and Service Assurance Under Rigorous Testing

Comprehensive Performance Limit Testing: Every batch of U-shaped pipe clamps (329900601) undergoes multiple rigorous tests before leaving the factory: static load test with 2 times the rated clamping force (no deformation for 30 minutes), vibration fatigue test of 1 million cycles (simulating 8 years of working conditions), high and low temperature cycle test from -40℃ to 120℃ (500 cycles without cracking), and salt spray corrosion test (1000 hours without rust spread). This series of strict tests ensures the long-term reliability of the product under extreme working conditions.

In the mining construction industry, where “details determine safety,” the XCMG XE2000 excavator U-shaped pipe clamp (part number 329900601) provides precise and reliable fixing performance, safeguarding the safe operation of the equipment’s piping system. Choosing this original factory-customized U-shaped pipe clamp not only reduces the risk of downtime due to pipeline failures but also extends the service life of the pipeline system, continuously creating value for mining production. Let XCMG’s original factory quality be your reliable guarantee for heavy-duty construction.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

318302434 engine air intake system XCMG XE2000 excavator spare parts

1 318303104 2 STEEL PIPE
2 329900303 32 THICKENED FLAT WASHER
3 805006412 30 BOLT M12×30 GB/T5783-2000
4 329900601 2 U-SHAPED PIPE CLAMP
5 805338279 12 WASHER 10 GB/T97.1-2002
6 805011330 14 BOLT M10×25 GB/T5783-2000
7 329900302 12 THICKENED FLAT WASHER
8 805238372 12 NUT M12 GB/T6170-2000
9 318805404 4 HOOP
10 318303249 1 PRESSURE PLATE
11 800163868 8 HOOP
12 800158171 1 TUBE
13 800163863 6 HOOP
14 318303105 1 STEEL PIPE ASSEMBLY
15 800171548 2 TUBE
16 800166844 4 TUBE
17 800160501 2 CHECK VALVE