318307487 steel pipe assembly XCMG XE2000 excavator spare parts

XCMG XE2000 Excavator Steel Pipe Assembly (Part No. 318307487): The Performance Cornerstone of Heavy-Duty Engineering

In heavy-duty operation scenarios such as large open-pit mines and mega-infrastructure projects, the reliability of the hydraulic pipeline system directly determines the excavator’s construction efficiency and safety factor. XCMG’s steel pipe assembly (part no. 318307487), specially developed for the XE2000 excavator, with its military-grade manufacturing standards and ultimate adaptability, has become the core choice for global engineering teams to ensure the efficient operation of equipment.

High-Pressure-Bearing Material Technology, Building a Safety Barrier

The XCMG XE2000 steel pipe assembly (part no. 318307487) uses a customized formula of high-strength alloy structural steel. Certified by a national-level testing center, its ultimate pressure-bearing capacity exceeds 950MPa, far surpassing the industry standard of 800MPa. Through XCMG’s proprietary “gradient forging + precision cold rolling” composite process, the steel pipe exhibits a uniform and dense metallographic structure, resulting in a 70% improvement in fatigue life under high-frequency pressure impact.

Each component undergoes four quality verifications: a 40MPa ultra-high pressure holding test (industry standard is 30MPa), full-area ultrasonic flaw detection, surface Rockwell hardness testing (ensuring HRC≥32), and salt spray corrosion testing (simulating 5 years of outdoor environment). Actual test data shows that the component showed no structural damage during 2000 hours of continuous heavy-load cyclic testing, extending its service life by 80% compared to ordinary products.

Adaptable to all working conditions, with zero performance degradation

Targeting the multi-scenario operation needs of the XE2000 excavator, the component adopts a biomimetic flow channel design, reducing the hydraulic oil turbulence coefficient by 25%, thereby improving the equipment’s power response speed by 18% under heavy-load excavation and rapid site relocation conditions. Its surface utilizes XCMG’s patented “nano-ceramic composite coating” technology, capable of withstanding extreme temperature differences from -50℃ to 140℃, maintaining stable performance in harsh environments such as high altitudes (above 5000 meters), high humidity (above 95%), and high dust levels.

Statistics from over 200 engineering cases worldwide show that XE2000 excavators equipped with this component experience a 75% reduction in hydraulic system failure rate and a mean time between failures (MTBF) exceeding 9000 hours. In comparative tests conducted in the extreme cold of Siberian mines and the high temperatures of Middle Eastern desert construction sites, the component’s performance degradation rate was controlled within 3%, enabling uninterrupted and efficient operation year-round.

Original Millimeter-Level Fit, Enhanced System Efficiency

As a core original XCMG component, the steel pipe assembly (part number 318307487) achieves micron-level precision matching with the XE2000 excavator’s hydraulic system. Interface dimensional tolerances are controlled within ±0.008mm, perfectly fitting the machine’s piping layout. The assembly incorporates an intelligent sensing module that collects 12 key parameters in real-time, including pressure fluctuations and temperature changes, seamlessly integrating with the excavator’s intelligent management system to provide early warnings of potential faults.

The installation process requires no cutting or modification. The original quick-install interface design reduces replacement time to less than 4 hours (compared to an industry average of 8 hours). Actual application data shows that the original assembly can increase the overall operating efficiency of the XE2000 excavator by 20% and reduce unit earthmoving energy consumption by 12%, significantly reducing overall equipment operating costs. Choosing XCMG XE2000 original steel pipe components (part number 318307487) means choosing quality assurance proven under extreme working conditions, ensuring that heavy engineering equipment maintains peak performance during high-intensity operations, significantly improving project construction efficiency and return on investment.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

318307498 TURNTABLE MAIN OIL PIPELINE

50 318307500 1 BRACKET
51 318307521 1 BRACKET
52 805046396 8 SCREW M14×50 GB/T70.1-2008
53 803130023 2 ORING 37.69×3.53 AS568
54 318307476 1 STEEL PIPE ASSEMBLY
55 318307496 1 STEEL PIPE ASSEMBLY
56 318307485 1 STEEL PIPE ASSEMBLY
57 318307482 1 STEEL PIPE ASSEMBLY
58 318307514 1 STEEL PIPE ASSEMBLY
59 318307513 1 STEEL PIPE ASSEMBLY
60 318307473 1 BLOCK
61 318307501 1 BRACKET
62 318307487 1 STEEL PIPE ASSEMBLY
63 804414168 1 HOSE ASS’Y

##