800161669 hose clamp XCMG XE2000 excavator spare parts

XCMG XE2000 Excavator Hose Clamp (Part No. 800161669): The Expert in Secure Hydraulic Hose Fixation

In the hydraulic hose system of large mining excavators, hose clamps are key components for maintaining hose stability and eliminating vibration wear. XCMG’s specially developed hose clamp (part no. 800161669) for the XE2000 excavator, with its high-strength material and precision clamping design, serves as a “safety guardian” for the safe operation of hydraulic hoses under heavy-duty conditions, providing a reliable hose fixing solution for engineering teams worldwide.

High-strength alloy material for durable clamping force

The XCMG XE2000 hose clamp (part no. 800161669) is made of high-quality spring steel through precision stamping. Authoritative testing shows that its tensile strength reaches 750MPa, and the hardness of the clamping part reaches HRC42-47, far exceeding the industry’s standard of 600MPa for conventional hose clamps. Through XCMG’s proprietary “overall quenching + low-temperature tempering” process, the hose clamp possesses excellent elastic recovery performance, exhibiting no plastic deformation under long-term clamping conditions, with a clamping force attenuation rate of less than 5%.

Each hose clamp undergoes three rigorous tests: clamping force test (rated clamping force up to 4kN, withstanding 1.5 times overload without permanent deformation), salt spray corrosion test (simulating 5 years of outdoor environment without rust), and fatigue life test (200,000 opening and closing cycles without breakage). Actual test data shows that in a continuous 3000-hour heavy-duty operation test, the hose clamp maintains a 99% clamping stability rate, and its service life is 180% longer than ordinary hose clamps.

Optimized structural design, adaptable to flexible pipelines

For the complex hydraulic hose layout of the XE2000 excavator, the hose clamp adopts an adjustable arched structure design, adaptable to various hydraulic hoses with diameters of 15-40mm. The clamping range can be adjusted from 0-8mm via precision adjusting bolts. The inner side is reinforced with an oil-resistant rubber gasket, using a food-grade oil-resistant formula with a Shore hardness of 75±3. This enhances friction with the hose and prevents wear on the hose sheath caused by direct metal-to-metal contact. The service life of the rubber gasket is extended by 120% compared to ordinary products.

The hose clamp mounting holes are precision punched to an IT8 tolerance level, with positioning accuracy controlled within ±0.05mm, ensuring precise alignment with the machine mounting base. The unique anti-loosening nut design (with a built-in nylon locking ring) effectively resists loosening caused by high-frequency vibrations of the equipment, reducing the loosening rate by 98% compared to ordinary hose clamps.

Adaptable to all working conditions, ensuring hose safety

This hose clamp is specifically designed for the multi-scenario operating needs of the XE2000 excavator, maintaining stable clamping performance in high-vibration breaking operations, high-frequency digging cycles, and extreme environments with alternating high and low temperatures. Its surface employs a dual anti-corrosion process of “galvanizing + passivation,” achieving over 1000 hours of salt spray testing (equivalent to 5 years of outdoor anti-corrosion effect). It maintains stable performance in high-humidity, high-salt coastal mining areas or dusty mining environments.

Actual engineering application data shows that XE2000 excavators equipped with this hose clamp experience an 85% reduction in hydraulic hose failure rate and a 92% reduction in leaks caused by hose wear. In heavy-duty operations in large mines, the hose clamp effectively limits hose sway to within 5mm, reducing friction damage between the hose and surrounding components by 90%, significantly extending the service life of the hydraulic hose.

Original Factory Deep Compatibility, System Synergistic Efficiency

As a core original XCMG component, the hose clamp (part number 800161669) achieves 100% precise matching with the hydraulic hose specifications and layout of the XE2000 excavator, perfectly conforming to the design requirements of the entire machine’s hydraulic system. The hose clamp installation position has been optimized through fluid dynamics and kinematics simulation, enabling it to adaptively adjust the clamping force according to the dynamic deformation of the hose, avoiding hose damage caused by over-clamping.

The installation process requires no modification or adjustment, using original high-strength bolts for fixation, improving installation efficiency by 60% compared to general-purpose hose clamps. Data shows that XE2000 excavators equipped with original-factory hose clamps experience a 90% longer maintenance cycle for the hydraulic hose system and a 30% reduction in overall operation and maintenance costs.

Choosing XCMG XE2000 hose clamps (part number 800161669) means choosing hose safety assurance proven under extreme working conditions. This ensures that the hydraulic hose system of heavy-duty excavators maintains stable and efficient operation during high-intensity work, significantly reducing the risk of equipment failure and creating higher returns for engineering projects.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

318307325 pump oil suction pipeline

1 329900304 36 THICKENED FLAT WASHER
2 805047646 18 BOLT M16×45 GB/T5782-2000
3 329900303 16 THICKENED FLAT WASHER
4 805011131 18 BOLT M16×50 GB/T5782-2000
5 805049511 16 BOLT M12×45 GB/T5782-2000
6 800161669 12 HOSE CLAMP
7 800161637 8 HOSE CLAMP
8 318307470 1 COOLING PUMP GEAR PIMP MOUNTING
9 318307317 1 STEEL PIPE ASSEMBLY
10 318307310 3 STEEL PIPE ASSEMBLY
11 318307321 3 OIL SUCTION HOSE
12 318307320 3 STEEL PIPE ASSEMBLY
13 318307316 1 STEEL PIPE ASSEMBLY
14 318307318 1 STEEL PIPE ASSEMBLY
15 318307315 1 STEEL PIPE ASSEMBLY
16 318307323 2 STEEL PIPE ASSEMBLY
17 318307313 2 OIL SUCTION HOSE
18 318307312 2 STEEL PIPE ASSEMBLY
19 801134077 9 ORING 85×3.55 GB/T3452.1-2005
20 803174967 1 ORING 40×3.55 GB/T3452.1-2005
21 803192098 4 ORING 60×3.55 GB/T3452.1-2005
22 805139896 12 SCREW M16×50 GB/T70.1-2008
23 805139869 8 SCREW M12×35 GB/T70.1-2008
24 318307311 1 STEEL PIPE ASSEMBLY
25 801102881 1 ORING 42.5×3.55 GB/T3452.1-2005
26 318307467 1 MAIN PUMP I MOUNTING
27 318307469 1 MAIN PUMP II MOUNTING
28 318307468 1 MAIN PUMP III MOUNTING