318005581 pipe clip XCMG XE2000 excavator spare parts

XCMG XE2000 Pipe Clamp (Part No. 318005581): The Stable Guardian of Piping Systems

In the hydraulic piping systems of large mining excavators, pipe clamps are key components for securing pipes, eliminating vibration, and ensuring stable hydraulic oil transmission. XCMG’s pipe clamp (part no. 318005581), specially designed for the XE2000 excavator, utilizes high-strength materials and a precision structural design to become the core guarantee for the safe operation of the piping system under heavy-duty conditions, providing a reliable pipe fixing solution for engineering teams worldwide.

High-Strength Material and Manufacturing Process for Stable Clamping Force

The XCMG XE2000 pipe clamp (part no. 318005581) is integrally stamped from high-strength alloy steel. Authoritative testing shows that its tensile strength reaches 600MPa, and the hardness of the clamping part reaches HRC35-40, far exceeding the industry’s conventional pipe clamp tensile strength standard of 500MPa. Through XCMG’s proprietary “precision stamping + overall heat treatment” process, the pipe clamp exhibits uniform and stable overall mechanical properties, making it less prone to deformation or breakage under long-term pipeline vibration and pressure.

Each pipe clamp undergoes three rigorous tests: clamping force test (rated clamping force up to 5kN, withstanding 1.5 times overload without permanent deformation), salt spray corrosion test (simulating 3 years of outdoor environment without rust), and fatigue life test (100,000 vibration cycles without loosening). Actual test data shows that in a continuous 2000-hour heavy-duty operation test, the pipe clamp maintains a 98% clamping stability rate, and its service life is 80% longer than ordinary pipe clamps.

Optimized structural design adapts to complex pipeline layouts

For the dense and complex pipeline system of the XE2000 excavator, the pipe clamp adopts a modular structural design, adaptable to various hydraulic pipelines with diameters of 25-50mm, achieving precise clamping through adjustable bolts. The inner side is reinforced with an oil-resistant rubber liner, increasing the coefficient of friction by 50%. This enhances pipe fixing and prevents pipe wear caused by direct metal-to-metal contact, effectively protecting the pipe surface. The pipe clamp mounting holes are precision drilled to IT9 tolerance, with positioning accuracy controlled within ±0.1mm, ensuring precise alignment with the machine mounting base. In extreme temperature tests ranging from -40℃ to 100℃, the rubber liner showed stable performance without hardening or aging, guaranteeing clamping reliability across the entire temperature range.

Adaptable to all working conditions, ensuring pipe safety

This pipe clamp is specifically designed for the multi-scenario operation needs of the XE2000 excavator, maintaining stable clamping even in high-vibration breaking operations, high-frequency digging cycles, and bumpy relocation conditions. Its special anti-loosening structure design (built-in anti-loosening washer) effectively resists bolt loosening caused by equipment vibration, reducing the loosening rate by 90% compared to ordinary pipe clamps. Actual engineering application data shows that XE2000 excavators equipped with this pipe clamp experience a 70% reduction in pipeline system failure rate and an 85% reduction in hydraulic leakage caused by loose pipelines. In heavy-duty operations in large mines, the pipe clamp effectively absorbs pipeline vibration energy, reducing system vibration amplitude by 40% and significantly extending the service life of hydraulic pipelines.

The installation process requires no modification or adjustment, using original high-strength bolts for fixing, improving installation efficiency by 40% compared to generic pipe clamps. Data shows that XE2000 excavators equipped with original pipe clamps experience a 60% longer maintenance cycle for the hydraulic pipeline system and a 20% reduction in overall operation and maintenance costs.

Choosing XCMG XE2000 pipe clamps (part number 318005581) means choosing pipeline safety assurance proven under extreme working conditions, ensuring the hydraulic system of heavy-duty excavators maintains stable and efficient operation during high-intensity operations, significantly reducing equipment failure risks and creating higher returns for engineering projects.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

318307480 bracket

1 318005581 2 PIPE CLIP
2 329900983 2 THICKENED FLAT WASHER
3 805046659 2 BOLT M14×100

##