800143977 o-ring XCMG XE2000 excavator spare parts

XCMG XE2000 excavator O-ring (part number 800143977): Precision sealing to prevent leakage in the fluid system.

The core components of the XCMG XE2000 excavator, such as the hydraulic valve assembly, cylinder head, and pipe joints, rely on O-rings for both dynamic and static sealing. If the O-ring seal fails, it will directly lead to hydraulic oil leakage, a sudden drop in system pressure, and malfunctions such as weak boom and slewing, severely impacting operational efficiency. This article focuses on the XCMG XE2000 original O-ring (part number 800143977), a high-pressure oil-resistant O-ring for excavators. With its precise dimensions and strong damage resistance, it serves as a reliable line of defense for the fluid system’s sealing.

Precisely compatible with XE2000: Zero deviation from original factory specifications

This O-ring (part number 800143977) is custom-made to strictly conform to the inner diameter, cross-sectional diameter, and depth parameters of the corresponding sealing groove for the XCMG XE2000 excavator, with dimensional errors controlled within ±0.02mm, ensuring a perfect fit with the original factory sealing groove. Whether assembled on hydraulic cylinder pistons, pilot valve interfaces, or cooling pipe joints, it requires no trimming or adjustment and can be directly snapped into the sealing groove to form a tight-fitting sealing surface. This eliminates the problems of “leaking due to being too loose” or “deformation due to being too tight” caused by dimensional deviations, which is the core advantage of the XE2000 dedicated sealing O-ring.

Special materials: oil-resistant, temperature-resistant, anti-aging, and wear-resistant.

Made of nitrile rubber (NBR) or fluororubber (FKM, according to original design), it possesses excellent oil and temperature resistance sealing performance: maintaining stable elasticity within a temperature range of -40℃ to 120℃ (fluororubber up to 200℃), without becoming brittle or softening; and without swelling or cracking after long-term contact with media such as hydraulic oil, diesel, and coolant, with a sealing performance degradation rate of less than 5%. Simultaneously, the material surface undergoes special treatment, resulting in a low coefficient of friction. In dynamic sealing scenarios such as the reciprocating motion of hydraulic cylinder pistons, wear is reduced by 40% compared to ordinary O-rings, extending service life by more than 2.5 times.

Dual sealing capability: adaptable to both dynamic and static operating conditions

Addressing the dynamic sealing (e.g., hydraulic cylinder pistons) and static sealing (e.g., valve assembly end caps) requirements of the XE2000 excavator, this O-ring achieves a dual sealing effect through optimized cross-sectional design: During static sealing, the O-ring deforms and fills the sealing groove gap using bolt tightening pressure, forming a gapless seal; during dynamic sealing, the elastic material adapts to the movement of the component, maintaining constant pressure on the sealing surface and preventing hydraulic oil leakage from the movement gaps. Even under high-frequency vibration or pressure fluctuation conditions, it maintains a stable seal, making it a typical leak-proof O-ring.

Key role: Ensuring the efficient operation of the fluid system
Sealing and leak prevention: Prevents leakage of hydraulic oil and coolant, avoiding resource waste and component corrosion;
Protective components: Reduce direct friction between metal sealing surfaces and extend the life of core components such as hydraulic cylinders and valve assemblies;
Stabilization system: Maintains stable hydraulic system pressure to ensure precise and powerful movements of the excavator’s boom, bucket, and other components.

As a high-pressure sealing component for construction machinery, the XCMG XE2000 excavator O-ring (part number 800143977) is an essential accessory for maintaining the original factory sealing standard and ensuring the efficient operation of the excavator. Choosing the original factory O-ring means choosing a leak-free system for safety and long-term operational stability.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

800169245 turbo charger plum bing XCMG XE2000 excavator spare parts

1 800167647 SUPERCHARGERGASKET
2 800168962 CHECKNUT
3 800169147 BOLT
4 800168884 TURBOCHARGERPLUMBING
5 800169199 TURBOCHARGERPLUMBING
6 800169058 CONNECTINGGASKET
7 860149567 ORING
8 800143977 ORING
9 800158307 ORING

XCMG XE2000 O-ring
800143977 Genuine parts
High-pressure oil-resistant O-rings for excavators
XE2000 dedicated sealing O-ring
Leak-proof O-rings
High-pressure seals for construction machinery