800169252 rear cooler XCMG XE2000 excavator spare parts

XCMG XE2000 Excavator Aftercooler 800169252 | Original factory compatible, high-efficiency cooling, corrosion resistant and durable

In heavy-duty mining operations and high-temperature summer work, the hydraulic system of the XCMG XE2000 is prone to insufficient heat dissipation, leading to a surge in oil temperature (exceeding 65°C). This can cause a decrease in hydraulic oil viscosity, aging of seals, and even pump and valve burnout, resulting in tens of thousands of yuan in repair and downtime losses. The XCMG original aftercooler 800169252 is specifically designed for cooling the XE2000 hydraulic system, offering three major advantages: precise adaptation, efficient cooling, and long-lasting corrosion resistance. It solves the heat dissipation problem and ensures stable operation of the hydraulic system.

Three core advantages protect the heat dissipation of hydraulic systems

1. Original factory precise fit, ready to use immediately after installation.

It fully complies with the XE2000 hydraulic system layout, with a dimensional error of ≤0.5mm. The inlet and outlet ports, mounting holes, and the entire machine’s piping and brackets are 100% compatible, allowing for direct replacement without modification.
It is compatible with the flow rate (maximum 120L/min) and pressure (≤35MPa) of the XE2000 hydraulic system, forming a synergistic heat dissipation system with the original cooling fan and piping, avoiding the “heat dissipation gap” caused by poor compatibility of ordinary coolers.

2. Highly efficient cooling and precise temperature control

Adopting a “multi-channel aluminum heat dissipation core” design, the heat dissipation area reaches 1.2㎡ (30% larger than ordinary coolers), and the heat dissipation efficiency is improved by 40%, which can stably control the hydraulic oil temperature at 45-60℃ (the optimal working temperature of the hydraulic system).
The internal flow channels of the core are optimized to ensure uniform hydraulic oil flow and prevent local stagnation, thus avoiding oil deterioration caused by “hot spots” and extending the hydraulic oil replacement cycle by 50%.

3. Corrosion resistant and durable, suitable for harsh working conditions.

The heat dissipation core is made of aerospace-grade rust-proof aluminum (3003 aluminum alloy), and the surface is anodized. It can withstand 600 hours of salt spray test without corrosion (ordinary aluminum coolers only last 300 hours).
The outer shell is made of cold-rolled steel plate with epoxy resin coating, which is impact resistant and prevents dust accumulation. It has a lifespan of over 20,000 hours in dusty and rainy environments such as mines, making it 60% more durable than ordinary coolers.

Applicable to multiple scenarios, with traceable quality

Heavy-duty mining: Rapid cooling under high-load operation to avoid hydraulic system overload;
Summer High Temperatures: Stable temperature control in high-temperature environments to prevent oil aging and seal failure;
Routine maintenance: Compact structure, easy to assemble and disassemble, cleaning core dust does not require disassembling the entire machine;
Original factory triple testing (heat dissipation efficiency, pressure resistance, and corrosion resistance testing), supports QR code traceability, and eliminates the risks of “insufficient heat dissipation and easy leakage” of inferior aftermarket coolers.

Why choose 800169252?

Compared to aftermarket products: 40% higher cooling efficiency, no risk of leakage, and 60% longer lifespan;
Compared to ordinary coolers: more precise fit, more stable temperature control, and reduced hydraulic failures;
Compared to general-purpose coolers: no modification required, ready to use immediately after installation, saving maintenance time.
If your XE2000 hydraulic oil temperature is too high or the cooler is leaking, select the original factory aftercooler 800169252 to protect the hydraulic system and reduce operating costs.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

800169252 rear cooler XCMG XE2000 excavator spare parts

1 800138360 BOLT
2 860135156 BOLT
3 800169144 BOLT
4 800168943 BOLT
5 800169069 BOLT
6 800167209 BOLT
7 800168944 HEXAGONNUT
8 800169099 WASHER
9 800169085 HEXAGONALHEADSCREW
10 800144926 ROLLING NEEDLE
11 800161599 T-SHAPEDSEAL RING
12 800169067 BOLT
13 800169146 INLETMANIFOLD
14 800169115 WATER-TRANSFER CONNECTION
15 800169004 INLETMANIFOLD GASKET
16 800161653 O-RING
17 860149565 ORING
18 800168978 THREADEDPLUG
19 800169169 WASHER
20 800168995 WASHER
21 800167088 WASHER

XCMG XE2000 excavator aftercooler 800169252
800169252 Original factory aftercooler
XCMG XE2000 Hydraulic System Cooler
Excavator High-Efficiency Cooler
Corrosion-resistant coolers for mining operations
800169252 Excavator parts
Summer high temperature hydraulic cooler
XCMG XE2000 heat dissipation components
Salt spray resistant excavator aftercooler
800169252 Leak-proof cooler