800167197 o-ring XCMG XE2000 excavator spare parts

XCMG XE2000 Excavator O-ring 800167197 | Original factory fit, oil-resistant and leak-proof, temperature-resistant and corrosion-resistant, ensuring stable operation of the fluid system.

The hydraulic valve assembly, fuel lines, coolant interfaces, and other fluid system components of the XCMG XE2000 excavator rely on O-rings for precision sealing. If these seals fail, hydraulic oil leakage, fuel loss, or coolant leakage can easily occur, leading to a drop in system pressure and accelerated component wear. The XCMG XE2000 genuine O-rings (part number 800167197) are specifically designed to meet the sealing requirements of the equipment’s fluid system. They tightly fill the gaps between components, preventing fluid leakage and impurity intrusion, thus building a solid “sealing defense” for the stable operation of the XE2000 excavator’s core hydraulic and fuel systems.

800167197 O-ring: Three core advantages, compatible with XE2000

Original factory precise fit: The dimensions strictly follow the XCMG XE2000 fluid system interface design standard. The inner diameter, wire diameter accuracy (tolerance ≤ 0.02mm), cross-sectional curvature and sealing groove specifications are completely matched. It can be directly installed without cutting or grinding, avoiding sealing gaps and installation jams caused by fit deviations. It is compatible with the sealing requirements of multiple parts such as hydraulic valve groups, fuel filter interfaces, and coolant pipelines, ensuring a seamless fit with components and adapting to system pressure and temperature conditions.
Strong oil resistance and leak prevention: Made of special nitrile rubber (NBR) with a rubber purity of over 98%, it has excellent oil resistance. After immersion in hydraulic oil, diesel oil, and other media for 72 hours, the volume change rate is ≤5%, the hardness change is ≤10 Shore A, and there is no swelling or cracking. The compression rebound rate is ≥92%, which can maintain elasticity for a long time, tightly fill the sealing gap, and prevent leakage under a system pressure of 25MPa. It effectively prevents power loss caused by hydraulic oil loss or safety hazards caused by fuel leakage.
Long service life with high temperature and corrosion resistance: The temperature range covers -40℃ to 120℃. It will not crack or harden in low-temperature environments, nor will it soften or flow in high-temperature conditions. It is suitable for high and low temperature alternation scenarios such as the engine compartment and hydraulic system of XE2000 excavators. The surface is treated with anti-aging agents to resist the corrosion of mining dust, construction site moisture and chemical media, and avoid seal failure caused by rubber aging. The service life exceeds 5000 hours (60% longer than ordinary nitrile rubber O-rings), reducing downtime maintenance costs caused by frequent replacement of seals.

Suitable for multiple scenarios, with traceable quality, and safe to use.

Whether the XE2000 is operating in high-dust mining operations (high-load operation of the hydraulic system), heavy-duty infrastructure construction (frequent start-stop operations causing pressure fluctuations), or in humid, rainy, and alternating high and low temperature outdoor environments, the 800167197 O-ring can reliably perform its sealing function. Each O-ring has passed XCMG’s original triple testing (sealing test, oil and temperature resistance test, and dimensional accuracy calibration), conforms to the ISO 3601-1 hydraulic transmission O-ring standard and engineering machinery sealing component specifications, supports official traceability, ensures safe use without hidden dangers, and avoids system failures and operational accidents caused by leakage from inferior O-rings.

Select 800167197, protect XE2000 fluid seal.

If you are experiencing hydraulic oil leakage, fuel leakage, or coolant loss on your XCMG XE2000 excavator, or need to replace aged or deformed O-rings, the 800167197 genuine O-ring is the best choice. It provides reliable sealing performance to ensure a clean and stable fluid system, reduce component wear, prevent power interruptions, and help the XE2000 maintain high-efficiency operation under various high-intensity working conditions, facilitating the smooth progress of engineering tasks.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

800169256 auxiliary drive device pulley XCMG XE2000 excavator spare parts

1 800158277 ANTI-WEARBUSHING
2 800167194 AUXILIARY DRIVE DEVICE PULLEY
3 800167195 KEYGROOVESEAL
4 800167196 DUSTRING
5 800167197 ORING

XCMG XE2000 excavator O-rings
800167197 O-ring
XCMG XE2000 Original O-rings
800167197 Original factory seal
O-rings in excavator fluid system
XCMG XE2000 Hydraulic Leakage Solution
Oil-resistant nitrile rubber O-rings
High and low temperature compatible O-rings
XE2000 excavator hydraulic valve group O-rings
800167197 Excavator parts
O-rings for mining operations
O-rings for sealing during infrastructure construction
High-pressure O-rings for construction machinery
XCMG XE2000 fuel system O-ring
Corrosion-resistant and leak-proof O-rings