800167194 auxiliary drive device pulley XCMG XE2000 excavator spare parts

XCMG XE2000 Genuine Hydraulic Oil Filter (800167194) – The Pure Guardian of Hydraulic Systems
XCMG XE2000 Dedicated Hydraulic Oil Filter Element | Part Number 800167194 | High-Efficiency Filtration for Comprehensive Protection

In the hydraulic system of the XCMG XE2000 large excavator, the hydraulic oil filter element (800167194) plays a crucial role in filtration and protection. This genuine filter element, with its superior filtration performance and reliable protective characteristics, ensures the hydraulic system maintains clean and efficient operation under harsh working conditions. Choosing a genuine filter element means choosing the most reliable hydraulic system protection solution for your equipment.

Why are original equipment manufacturer (OEM) hydraulic oil filters so important?

The filter element is the “blood purifier” of the hydraulic system, and its core functions include:
1. High-efficiency filtration: Effectively filters out particulate contaminants larger than 10μm from oil.
2. System protection: Prevents abnormal wear of precision components such as pumps, valves, and cylinders.
3. Oil maintenance: Extends the service life of hydraulic oil and reduces operating costs.
4. Guaranteed Flow: Low-resistance design ensures stable and unaffected system flow.

Four Advantages of Choosing Original Part Number 800167194

1. Precision filter material
Utilizing glass fiber composite filter media, the filtration accuracy reaches 10μm, with a β value ≥200.
2. Excellent structural strength
Built-in stainless steel support frame, with a pressure differential resistance of up to 2.1 MPa.
3. Excellent pollution-holding capacity
Special pleated design increases filtration area by 50% and extends service life by 2 times.
4. Reliable sealing performance
High-quality nitrile rubber sealing rings ensure 100% leak-free installation.

Applicable Models and Replacement Recommendations

•Applicable Models: XCMG XE2000 series excavators
• Original part number: 800167194
• Installation location: Hydraulic system return oil line
• Replacement cycle: It is recommended to replace every 1000 working hours or once a year.

Warning signals that need to be replaced

Replace the filter cartridge promptly if the following conditions occur:
• The noise from the hydraulic system has increased significantly.
• The equipment operates slowly or unstably.
• The filter element differential pressure indicator shows red.
• The hydraulic oil has darkened in color or its contamination level exceeds the standard.

Choose the original manufacturer for comprehensive protection.

• System cleaning: Ensure hydraulic oil cleanliness meets ISO 18/16/13 standards.
• Failure prevention: Reduces hydraulic system failures by 75%.
• Cost savings: Extends the service life of hydraulic components by more than 2 times.
• Operational support: Maintaining optimal equipment performance

Take action now!

[Professional Advice]

When replacing the filter element, please check the hydraulic oil quality at the same time. If it is severely contaminated, it is recommended to replace the hydraulic oil simultaneously. Before installation, apply a small amount of hydraulic oil to the surface of the sealing ring to ensure a good seal. It is recommended to regularly test the oil contamination level and adjust the replacement cycle according to the actual situation. When storing, please keep the packaging intact to avoid the filter element getting damp or damaged.

Get a personalized quote now

*For other spare parts procurement needs, please contact us!

800169256 auxiliary drive device pulley XCMG XE2000 excavator spare parts

1 800158277 ANTI-WEARBUSHING
2 800167194 AUXILIARY DRIVE DEVICE PULLEY
3 800167195 KEYGROOVESEAL
4 800167196 DUSTRING
5 800167197 ORING

XCMG XE2000 hydraulic filter element, 800167194, return oil filter element, hydraulic oil filter, XCMG genuine filter